90 DEGREE STAINLESS STEEL PIPE ELBOW

90 Degree Stainless Steel Pipe Elbow information

ADK ENGINEERING CO.,LIMITED is a good supplier of 90 Degree Stainless Steel Pipe Elbow from China,there are stainless steel 90 degree elbow,stainless steel 45 degree elbow and stainless steel 180 degree elbow.and here we discuss 90 degree stainless steel pipe elbow.

CHINA 90 DEGREE STAINLESS STEEL PIPE ELBOW

Name:90 Degree Stainless Steel Pipe Elbow

Material:Stainless Steel

ASTM/ASME A403 WP 304-304L-304H-304LN-304N

ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti

ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347-347H

Type:Long Radios and Short Radius

Size:DN15-DN1200

Mill Test Certificate: EN10204 3.1

Third Party Inspection Agency Like SGS,TUV,DNV,BV,LR.etc

Pipe Elbow categorized:Butt Welded Pipe Elbow,Socket Welded Pipe Elbow,Threaded Pipe Elbow

Standard of Pipe Elbows:

ASME/ANSI B16.9,ASME/ANSI B16.11,ASME/ANSI B16.28,ASME B16.5,MSS SP-43,MSS SP-79,MSS SP-83,MSS SP-97,GB/T10752-1995,DIN 2605,DIN 2605 Part 1 and DIN 2605 Part 2,EN10253 Typ A and B,GOST 17375-2001

Application:Chemical,Architecture,Water Supply,Drainage,Petroleum,Shipbuilding,Power Station.etc

An elbow is installed between two lengths of pipe (or tubing) to allow a change of direction,usually a 180° degree ,90° degree or 45° degree.The ends may be machined for butt welding, threaded (usually female),or socket. When the ends differ in size,it is known as a reducing (or reducer) elbow. A 180° degree elbow is the elbow who could make the pipe direction return.A 90º elbow,also known as a “90 bend”,or “quarter bend”,A 45º elbow,also known as a “45 bend” is commonly used in water-supply facilities,petroleum,gas,shipbuilding,mechanical,and solar-energy facility piping.

Pipe elbow are also categorized by length.The radius of curvature of a long-radius (LR) elbow is 1.5 times the pipe diameter,but a short-radius (SR) elbow has a radius equal to the pipe diameter.Short elbows,widely available,are typically used in pressurized systems.Long elbows are used in low-pressure gravity-fed systems and other applications

Other Steel Materials and Steel Grade of Pipe Elbows:

Carbon steel: ASTM/ASME A/SA 234 A/SA240

Grade:WPB,WPC,WPL,WHPY42,WHPY46,WHPY52,WHPY60

P235GHTC1/2 (St 35.8 I/ III), P265GH, S355J2H S30815,S31000,

S31050,S31500,S31726,S31803,S32760,N08904

Alloy Steel:ASTM/ASME A234 WP1,WP5,WP9,WP11,WP12,WP22,WP91

Mail us info@ipipefittings.com if you require 90 Degree Stainless Steel Pipe Elbow.